Home DIY Path Maker Mold

Bring your imagination to life and fulfill the dream of designing your own patio! The mold is EASY TO CLEAN and can be REUSED over and over for years to come. 

HOW IT WORKS

1) INSTALLATION SURFACE PREPARATION

The DIY Path Mold can be placed on any relatively flat surface. It will automatically configure the concrete to the existing base. For professional results, remove one inch of topsoil, and level the Path Maker before filling with concrete.

Removed topsoil can be utilized to fill in open spaces on sides and between concrete after walk has set up. Mix concrete thoroughly until a plastic-like (moldable) consistency is reached. If additional water is required, add small amounts until the correct consistency is obtained.

2) APPLICATION 

Use a bucket or trowel to fill each mold cavity level with surface of mold. While concrete is still in mold, pat and smooth cavity surface with trowel. Remove mold promptly. After removing the mold, smooth all edges with a trowel until appearance is satisfactory. Dipping trowel in water may be helpful. Place the mold adjacent to the completed section and continue this process until your project is completed. Having more than 2 molds speeds up the job.

3) CURING 

Concrete should be damp-cured for 5-7 days for the greatest strength. To outline/ trim blocks, fill-in separations with Sand/ Soil Mix after concrete has cured. Place dry Sand Mix in cracks and sweep in to desired level. Dampen the Sand Mix with a fine mist of water (do not over-wet). Let Sand/ Topping Mix harden to finish the project. 

SPECIFICATIONS

• Color: Black.
• Material: PP.
• Weight: 480g(AS) / 300g(G) / 900(F).
• Size: 36 x 36 x 4cm(AS) 

BUY NOW WITH NO RISK!

Customer satisfaction is our number one priority - and we mean it. Not satisfied with your order? No worries! Let us know within 30 days and we will give you a STRESS-FREE refund.